超声速流场中横向热喷流模拟湍流模型参数优化

Optimization of turbulence model parameters for transverse hot-jet flow simulation in supersonic flows

  • 摘要: 高温横向热喷流与超声速来流相互作用产生强烈的气动热干扰,导致标准湍流模型对分离区流动结构预测精度显著下降。本研究引入Kriging代理模型与遗传优化算法,构建了一种高温横向热喷流模拟中湍流模型参数优化策略。以锥柱裙弹身高温喷流流场为研究对象,采用正交试验构建模型输入参数与壁面压力响应的采样样本,结合CFD数值模拟获取训练数据,对SST k-ω模型的9个封闭参数进行全局寻优,得到适用于高温喷流条件的修正参数组合。结果表明,修正后的模型显著改善了对关键流动特征的预测精度。预测喷口前分离起始点位置前推,分离激波位置的预测误差从11.5%降至6.8%,分离区范围预测结果与试验结果吻合度更高;喷口附近壁面静压系数计算值、预测值与试验值的均方根误差由0.0431降至0.0348。本文参数优化模型提升了在喷流干扰区域内的工程预测可信度。

     

    Abstract: The interaction between a hot-gas lateral jet and a supersonic freestream induces strong aerodynamic-thermal interference, significantly degrading the predictive accuracy of standard turbulence models for flow structures in the separation region. To improve the capability of the SST k-ω turbulence model in capturing separation zone flow under such hot-gas jet interference, this study proposes a model parameter optimization strategy based on a Kriging surrogate model and a genetic algorithm. Using the flow field around a cone-cylinder-flare configuration with a hot-gas jet as the test case, an orthogonal experimental design was applied to generate sample sets of model parameters and corresponding wall pressure responses. Training data were obtained from CFD simulations, and a global optimization of the nine closure coefficients in the SST k-ω model was carried out, resulting in an adjusted parameter set tailored to hot-gas jet conditions. The optimized model shows marked improvement in predicting key flow features: the predicted separation onset point upstream of the jet moves forward, the error in the separation shock location is reduced from 11.5% to 6.8%, and the predicted extent of the separation zone agrees more closely with experimental measurements. Moreover, the root-mean-square error between the computed wall pressure coefficient near the jet exit and experimental data decreases from 0.0431 to 0.0348, demonstrating enhanced reliability for engineering predictions in jet interaction regions.

     

/

返回文章
返回