基于类有理分式的强鲁棒性三阶精度激波捕捉格式研究

A Highly Robust Third-Order Shock-Capturing Scheme Based on Quasi-Rational Interpolation

  • 摘要: 以MUSCL为代表的二阶精度保单调格式因间断捕捉能力强,计算效率高,在计算流体力学的工程应用中占据主流地位,但因此类格式中采用的限制器函数严重影响了格式在光滑区的分辨率,导致极值点处精度降阶,流动分离区模拟精度低,至今仍是流体力学关注的重要课题。本文在HWCNS(Hybrid Cell-Edge and Cell-Node Weighted Compact Nonlinear Schemes)格式框架下,基于类有理分式(Quasi-Rational, QR)非多项式插值方法,发展了一种强鲁棒性的三阶精度格式。QR插值与MUSCL插值方法具有相同的三点模板,在无极值点的光滑区具有三阶精度,在单调模板上保单调,在含极值点模板中具有有界性。采用ADR方法分析了格式的频谱特性;通过Sod激波管、Leblanc激波管和天体射流问题验证了格式的强鲁棒性;在三维双椭球标模和HB-2标模上进行了气动力和表面热流的工程验证。结果表明:QR格式的数值耗散显著低于MUSCL-minmod格式,在极端算例中于本文给定的网格、CFL数和通量分裂设置下、未采用额外正性保持处理即可稳定完成计算,在工程标模上以与MUSCL-minmod基本相当的计算成本实现了更准确的气动力和热流预测。该格式为工程CFD提供了一种无需限制器的非多项式高精度方案,因QR格式模板与主流MUSCL格式一致,使得该方法易于集成到现有成熟CFD软件中。

     

    Abstract: Second-order monotonicity-preserving schemes represented by MUSCL (Monotone Upstream-Centered Schemes for Conservation Laws) have dominated engineering computational fluid dynamics due to their strong shock-capturing capability and high computational efficiency. However, the limiter functions employed in such schemes severely degrade resolution in smooth regions, causing accuracy deterioration at extrema and low fidelity in separated flow simulations, which remains an important topic of concern in fluid dynamics. In this paper, within the HWCNS (Hybrid Cell-Edge and Cell-Node Weighted Compact Nonlinear Schemes) framework and based on the quasi-rational (QR) non-polynomial interpolation method, a highly robust third-order scheme is developed. The QR interpolation shares the same three-point stencil as the MUSCL method, achieves third-order accuracy in smooth regions without extrema, preserves monotonicity on monotonic stencils, and guarantees boundedness on stencils containing extrema. The ADR (Approximate Dispersion Relation) method is employed to analyze the spectral properties. The Sod shock tube, Leblanc shock tube, and astrophysical jet problems are used to verify the scheme's strong robustness. Engineering validation of aerodynamic forces and surface heat flux is performed on the three-dimensional double-ellipsoid and HB-2 standard models. Results demonstrate that the QR scheme exhibits significantly lower numerical dissipation than the MUSCL-minmod scheme, computes stably in extreme cases under the present grid, CFL number and flux-splitting settings without additional positivity-preserving treatment, and achieves more accurate aerodynamic force and heat flux predictions at a computational cost comparable to that of MUSCL-minmod on engineering standard models. This scheme provides a limiter-free non-polynomial high-accuracy approach for engineering CFD. As the QR scheme shares the same stencil as the mainstream MUSCL method, it can be readily integrated into existing mature CFD software.

     

/

返回文章
返回