Citation: | WANG Xiangfeng, YAN Peigang, YU Libin, HAN Wanjin. Flow separation and vortex motion in flow filed of two stage axial compressor[J]. ACTA AERODYNAMICA SINICA, 2014, 32(2): 177-183. DOI: 10.7638/kqdlxxb-2012.0075 |
[1] |
季路成, 王延荣, 邵卫卫, 等. 缘线匹配主导下的叶轮机非定常设计[J]. 工程热物理学报, 2008, 29(10): 1667-1672.
[2] ZHENG X Q, ZHOU X B, ZHOU S. Investigation on a type of flow control to weaken unsteady separated flows by unsteady excitation in axial flow compressors[J]. ASME Journal of Turbomachinery, 2005, 127(2): 489-496. [3] 袁巍, 陆亚钧, 李秋实. 叶轮机械内的分离旋涡流动[J]. 工程热物理学报, 2002, 23(6): 711-714. [4] 陈海生, 谭春青. 叶轮机械内部流动研究进展[J]. 机械工程学报, 2007, 43(2): 1-11. [5] 张涵信, 邓小刚. 三维定常分离流和涡运动的定性分析研究[J]. 空气动力学学报, 1992, 10(1): 8-12. [6] 韩万金, 钟兢军, 黄洪雁, 等. 具有叶顶间隙的涡轮正弯叶栅流场的拓扑与旋涡结构[J]. 空气动力学学报, 2004, 17(2): 141-145. [7] GBADEBOS A, CUMPSTY N A. Three-dimensional separations in axial compressors[R]. ASME Paper GT-2004-53617, 2004. [8] SPAKOVSZKY L. A criterion for axial compressor hub-corner stall[R]. ASME Paper, GT-2006-91332, 2006. [9] HAN W J, YANG Q H. Topology and vortex structures of turbine cascade with different tip clearance[J]. Chinese Journal of Aeronautics, 2002, 15(1): 18-26. [10]KANG S. Anapplication of topological analysis to studying the three-dimensional flow in cascades; part I-topological rules for skin-friction lines and section streamlines[J]. Applied Mathematics and Mechanics, 1990, 11(5): 489-495. [11]KANG S, WANG Z Q. Anapplication of topological method to analysing the three-dimensional flow in cascades; part Ⅱ-topological analysis on the vector field patterns of skin-frictions and section streamlines[J]. Applied Mathematics and Mechanics, 1990, 11(12): 1119-1127. [12]周逊, 韩万今. 涡轮矩形叶栅中旋涡模型的进展回顾[J]. 航空动力学报, 2001(3): 199-204. |
[2] |
钟兢军, 苏杰先, 王仲奇. 压气机叶栅壁面拓扑和二次流结构分析[J]. 工程热物理学报, 1998, 19(1): 40-44.
[14]SALVAGE J W. Investigation of secondary flow-behaviour and end wall boundary layer development through compressor cascades[R]. Von Karman Institute for Fluid Dynamics, Technical Note 107, June, 1974. [15]INOUE M, KUROUMARU M. Three-dimensional structure and decay of vortices behind an axial flow rotation blade row[J]. ASME J. of Eng. for Gas Turbine and Power, 1984, 106: 159-173. [16]JOSLYNH D, DRING R P. Axial compressor stator aerodymamics[J]. ASME Journal of Engineering for Gas Turbines and Power, 1985, 107: 485-493. [17]KANG S. Investigation of thethree dimensional flow within a compressor cascade with and without tip clearance[D]. [PhD thesis]. Dept. of Fluid Mechanics, Vrije Universiteit Brussel, 1993. |
[3] |
唐燕平, 陈懋章, 陈芳. 扩压叶栅中的旋涡运动[J]. 航空动力学报, 1990, 5(2): 103-112.
|
[4] |
张华良. 采用叶片弯/掠及附面层抽吸控制扩压叶栅内涡结构的研究[D]. [博士学位论文]. 哈尔滨工业大学, 2007: 102-105.
|
[5] |
张永军, 王会社, 徐建中. 扩压叶栅中拓扑和旋涡结构的研究[J]. 中国科学, E辑: 技术科学,2009, 39(5): 1016-1025.
[21]WANG K C. Separation patterns of boundary layer over an inclined body of revolution[J]. AIAA Journal, 1972, 10(1): 1044-1050. [22]张涵信. 分离流与旋涡运动的结构分析[M]. 北京: 国防工业出版社. 2005: 17-25. |
[1] | DU Menghua, TIAN Linlin, ZHU Chunling. IDDES simulations of flow separation around the iced airfoil and its modal analysis[J]. ACTA AERODYNAMICA SINICA, 2023, 41(11): 46-55. DOI: 10.7638/kqdlxxb-2022.0140 |
[2] | YIN Yuhui, LI Haoran, ZHANG Yufei, CHEN Haixin. Application of machine learning assisted turbulence modeling in flow separation prediction[J]. ACTA AERODYNAMICA SINICA, 2021, 39(2): 23-32. DOI: 10.7638/kqdlxxb-2020.0155 |
[3] | LI Chaolong, XIA Zhixun, LUO Zhenbing, DENG Xiong, YANG Shengke, WANG Lin. Numerical study on flow separation of underwater cylinder with dual synthetic jets actuator[J]. ACTA AERODYNAMICA SINICA, 2020, 38(2): 254-259, 267. DOI: 10.7638/kqdlxxb-2018.0224 |
[4] | LI Guangnian, WU Weiguo, ZHANG Jun, XIE Yonghe, HU Xiaofei, BAI Xinglan. Three-dimensional flow field structure of ship propeller analysis by means of 2D-LDV[J]. ACTA AERODYNAMICA SINICA, 2014, 32(5): 700-704. DOI: 10.7638/kqdlxxb-2013.0055 |
[5] | 吴寿荣. 平面定常跨声速等熵流动的分析[J]. ACTA AERODYNAMICA SINICA, 2012, 30(6): 699-703. |
[6] | XIE Yu-fei, LIU Jin-he. Physical analysis of several problems in separated flows[J]. ACTA AERODYNAMICA SINICA, 2007, 25(z2): 14-23. |
[7] | XIE Yu-fei, LIU Jin-he. Physical Analysis of Several Problems in Separated Flows[J]. ACTA AERODYNAMICA SINICA, 2007, 25(z1): 14-23. |
[8] | Guo Yijun, Zong Wengang. Numerical Simulation of Hypersonic Flows around Blunt Cones with Topological Analysis in Sectional Flow Patterns[J]. ACTA AERODYNAMICA SINICA, 2000, 18(1): 34-38. |
[9] | Zhang Hanxin, Guo Yijun. Topology of Flow Patterns on Cross Section Perpendicular to Surface of Revolutionary Body[J]. ACTA AERODYNAMICA SINICA, 2000, 18(1): 1-13. |
[10] | Han Wanjin, Zhong Jingjun, Huang Hongyan, Wang Zhongqi. Topological and Vortex Structure the Flow Field of the Positively Curved Cascade with the Tip Clearance[J]. ACTA AERODYNAMICA SINICA, 1999, 17(2): 141-149. |